Process Calibrators
Fluke 718 100G Pressure Calibrator

– Pressure Source & Milliamp Measurement to calibrate & maintain almost any pressure device
– Integrated pump is easily cleaned when accidently exposed to fluids that reduces cost of ownership and repairs and enables servicing the pump in the field
– Error % calculation for quicker pass/fail decision making in the field
– Best in class mA accuracy of 0.015 % for better measurement confidence & workload coverage
– Min/Max/Hold to capture changing measurements
– Switch test feature for quicker and more accurate pressure switch testing
– New 1 and 300 PSI pressure ranges mean fewer extra tools required
– 1, 30, 100 & 300 PSI ranges now available

    Description

    The complete solution to pressure calibration

    The Fluke 718 pressure calibrator family (includes 4 models) provide a total pressure calibration solution for transmitters, gauges and switches. This compact pressure calibration solution is about a third of the size of comparable instruments and weighs just one kilogram (two pounds). The unique easy to clean pump helps protect the pump from damage and provides the ability to service the pump without disassembly, even in the field.

     

    General Specifications
    Maximum voltage30 volts: Non-operating
    Temperature-40 °C to 60 °C
    Operating Temperature-10 °C to 55° C
    Relative Humidity95 % (10 °C to 30 °C)
    75 % (30 °C to 40 °C)
    45 % (40 °C to 50 °C)
    35 % (50 °C to 55 °C)
    Operating Altitude3,000 M max
    Shock1 M drop test
    VibrationRandom, 2 g, 5 Hz – 500 Hz
    SafetyCSA C22.2 No. 1010.1: 1992
    EMCEN50082-1: 1992 and EN55022: 1994 Class B
    Size216 mm x 94 mm x 66 mm (8.50 in x 3.72 in x 2.60 in)
    Weight992 g (35 oz)
    Power, battery life9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline; two batteries in 718
    Battery Life4 to 20 hours typical, depending on functions used
    WarrantyThree years (one year on pressure pump in Fluke 718)
    DisplayLCD, 5 digit pressure and current simultaneous
    NoteFor use with non-corrosive gasses

     

    Model NameDescription
    Fluke 718 1GPressure Calibrator -1 to 1 PSI, (-68.9 mbar to 68.9 mbar, -6.89 to 6.89 kPa)All models include:

    • Protective Yellow Holster with test lead storage
    • Instructions Sheet (14 languages)
    • Test Leads and Alligator Clip
    • Two 9V alkaline batteries
    • NIST – Traceable calibration report and data
    Fluke 718 30GPressure Calibrator -12 PSI to 30 PSI, (-850 mbar to 2 bar, -85 to 206.84 kPa)
    Fluke 718 100GPressure Calibrator -12 PSI to 100 PSI, (-850 mbar to 7 bar, -85 to 689.48 kPa)
    Fluke 718 300GPressure Calibrator -12 PSI to 300 PSI, (-850 mbar to 20 bar, -85 to 2068.42 kPa )

     

    Technical Specifications
    Standard718 Series
    Measure Pressure: Internal Sensor
    Accuracy: 0.025% full scale
    Functions: Zero, min/max, hold, damp
    Note: Dry air, non-corrosives only718 1G
    Range: -1 PSI to +1 PSI, -68.9 mbar to 68.9 mbar (-6.89 kPa to 6.89 kPa)
    Resolution: 0.0001 psi, 0.001 mbar, 0.0001 kPa
    Over Pressure: 5x Full Scale
    Functions: Zero, Min, Max, Hold, Damp718 130G
    Range: -12 PSI to 30 PSI, (-850 mbar to 2 bar, -85 to 206.84 kPa)
    Resolution: 0.001 psi, 0.1 mbar, 0.01 kPa
    Over Pressure: 5x Full Scale
    Functions: Zero, Min, Max, Hold, Damp718 100G
    Range: -12 PSI to 100 PSI, (-850 mbar to 7 bar, -85 to 689.48 kPa)
    Resolution: 0.01 psi, 0.1 mbar, 0.01 kPa
    Over Pressure: 2x Full Scale
    Functions: Zero, Min, Max, Hold, Damp718 300G
    Range: -12 PSI to 300 PSI, (-850 mbar to 20 bar, -85 to 2068.42 kPa )
    Resolution: 0.01 psi, 1 mbar, 0.1 kPa
    Over Pressure: 375 PSI 25 bar
    Functions: Zero, Min, Max, Hold, Damp
    Fluke 718 series via using 700 Series Pressure ModulesRange: 29 pressure modules, 0 – 1 in H20 to 10,000 psi, 2.5 mbar to 700 bar. Over pressure per pressure module specs
    Resolution: Per pressure module specs
    Accuracy: To 0.025 % of full span, per pressure module specs
    Functions: Zero, Min, Max, Hold, Damp
    Note: Media compatibility per pressure module specs
    Fluke 718 series via built in pumpRange: -12 PSI or -850 mbar to full scale Supported Pressure Units; psi, in H20 (4 °C), in H20 (20 °C), cm H20 (4 °C), cm H20 (20 °C), bar, mbar, kPa, inHg, mmHg, kg/cm
    Loop Power:
    Range: 24 V dc
    Accuracy: +/- 10 %
    Note: Drive; 20 mA into 1000 Ω for battery > 6.8V; 700 Ω for battery 5.8 to 6.8 V
    mA Measure:
    Range: 0 mA to 24 mA
    Resolution: 0.001 mA
    Accuracy: 0.015 % + 1 count